Table of Contents
Advertisement
Line Interface Modules
Basecard Options
The Subrate LIM basecard options are typically set at the factory to match your network operation.
Check these settings when you first install the unit. You need not repeat the procedure unless you
change your network.
1. Examine the option switch on the plug-in interface card.
2. Refer to
Figure 4-4
3. When you are satisfied that the basecard options are set correctly, install the LIM module in
the shelf as described previously in this section under the paragraph on
Figure 4-4
036R340-000
Issue 16
for switch location and
Subrate LIM Module
Office Connunications Manager OCM-1000/OCM-2000
Installation & Operation
Table 4-12
for option descriptions.
ON (Closed)
1 2 3 4 5 6 7 8
OFF
OFF (Open)
Refer To Table 4-12
For
Option Selection
036P437-001
Subrate LIM
Basecard
Subrate LIM
LIM Installation
.
S1
4-17
Advertisement
Table of Contents
