Gas Connection - Bartscher MFG 7341 Manual

5.1.3 Gas connection

WARNING!
The device installation and any adaptation to different gas type must
be performed only according to the valid regulations and by the
qualified professional personnel.
The device should be inspected by the professional personnel at
least once a year. In case of fire immediately close the gas valve and
use the appropriate fire extinguisher!
The device is designed and certified for operation with the gas type specified on the
•
rating plate. Before the installation make sure that the local gas supply system (gas
type and pressure) conforms to the device preset.
The gas connection is located on the left side of the device and is marked "GAS".
•
The device must be connected to the gas system only by the qualified gas installer
•
according to the local regulations.
In generally accessible installation locations follow the safety regulations, as well as
•
fire and panic protection standards.
The certified gas valve must be located in easily accessible place between the gas
•
system and the device allowing for quick gas supply cutting off.
Make sure that the gas hose does not touch hot oven parts.
•
CAUTION!
After the installation make sure that the connections are properly fixed.
Never use flame for checking the tightness of the gas pipes, only the soap
solution or special foaming product for leak detection.
- 58 -