Installation; Positioning; Electric Connection - Bartscher IK 30TC-1 Instruction Manual

5. Installation

5.1 Positioning


Unpack the device and remove all package materials according to the valid
environment protection regulations.
CAUTION!
Never remove the rating plate and any warning signs from the device.

Place the device on top of an even, stable, dry, and water-resistant surface which
supports the weight of the device and is not heat sensitive.

Never place the device on a flammable surface.

Do not place the device near an open flame, electric oven or other source of heat.

Do not block or cover the ventilation ducts that allow for air to circulate around the
device. Doing so may lead to overheating of the device.

Keep a distance of at least 5 – 10 cm from flammable walls and other objects.

Never place the device in humid or wet environment.

Do not place the induction plate near other equipment and objects sensitive to
magnetic fields (e.g. radio, television, etc.).

Place the device so that the plug is easily accessible and can be quickly removed
from its socket in case of necessity.

5.2 Electric connection

DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation the local power grid specification
should be compared with that of the device (see type label).
Connect the device only in case of compliance!

The power supply circuit with the socket must be protected by the fuse of at least 16A.
Connect the device directly to a single grounded socket. Do not use any power bar or
multiple socket.
- 35 -