Product Safety Information; Product Specifications - Ingersoll-Rand IQ V20 User Manual

EN

Product Safety Information

Intended Use:
These Cordless Impact Wrenches are designed to remove and install threaded fasteners. These cordless tools are designed to be used in Class I,
Division 2, Groups A-D Hazardous Locations, with a T4 temperature classification.
● Substitution of components will invalidate the product to Class I Division 2 classification.
● Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or
serious injury. Save all warnings and instructions for future reference.
● Responsibly recycle or dispose of Batteries. Do not puncture or burn batteries. Improper disposal may endanger the environment or cause
personal injury.
● Disconnect the tool from the battery before making any adjustments or changing accessories. Such preventive safety measures reduce
the risk of starting the tool accidentally.
● Do not disconnect or reconnect the battery in hazardous locations.
● Only use Tools with appropriate voltage Ingersoll Rand batteries and Charger. Use of any other batteries may create a risk of fire, personal
injury or property damage.
For additional information, refer to Cordless Impact Wrench Safety Manual Form 04581146, Battery Charger Safety Information Manual
Form 10567832 and Battery Safety Information Manual Form 10567840
Manuals can be downloaded from ingersollrandproducts.com.
Special Conditions for Safe Use
There is a risk of explosion hazard if these warnings are not followed:
● Do not disconnect or reconnect the battery in a hazardous location.
● The secondary battery retention device must be fully set in position before use.
● Do not charge the battery in hazardous locations. Battery Charger must be located outside of a hazardous location at all times.
IQ Power Control System
V
The intelligent control management system on this model can be adjusted with the power regulator. Select power mode by turning the dial at the
back of the tool and align the notch with the desired setting. Each mode provides intelligent power control in Forward and full power in Reverse.
Refer to illustration #1 on page 2.
Mode
Hand-tight
Wrench-tight
Mid-power
Max-power
Impact wrenches are not torque wrenches. Connections requiring specific torque must be checked with a torque meter after fitting with an
impact wrench. Improperly torqued fasteners may loosen and cause injury.

Product Specifications

Tool Model
W5133P-C1D2
W5153P-C1D2
Tool Model Impacts per Minute
W5133P-C1D2
W5153P-C1D2
EN-1
Name
Torque-limiting, automatic shut-off
Torque-limiting, continuous run
Maximum torque, continuous run
Voltage Drive
V, DC Type
20 Square (Pin Retainer)
20 Square (Pin Retainer)
Battery Model - BL2012
Vibration (m/s
(EN60745)
bpm Level
3100 14.5
3100 14.5
WARNING
WARNING
(see Fig 3, 4 and 5).
Description
WARNING
\
Size †Pressure (L
3/8"
1/2"
)
2
Impacts per Minute
*K bpm
2.1 3300
2.1 3300
Sound Level dB(A)
(EN60745)
) ‡Power (L
p
90 101
90 101
Battery Model - BL2022
Vibration (m/s
(EN60745)
Level
11.3
11.3
47644707001_ed4
)
w
)
2
*K
2.6
2.6