(For Gpu Model) - Asus RS720A-E12 Series User Manual

2.7.3 Installing a GPU card to riser card bracket 1

(for GPU model)

To install a passive GPU (FH/FL) card to the riser card bracket 1:
1. Loosen the thumbscrew securing the riser card bracket to the chassis.
2. Lift the riser card out of the chassis by firmly holding it by the tab and pulling it upwards
to detach it from the PCIe slot on the motherboard.
3. Place the riser card bracket on a flat and stable surface.
4. Connect the power cable to the GPU card, and ensure to place the cable through the
opening of the GPU air duct.
5. Secure the GPU air duct to the GPU card with the screws.
2-32
Chapter 2: Hardware Information