3.
USB 3.2 Gen 1 connector (U31G1_34; U31G1_5)
This connector allows you to connect a USB 3.2 Gen 1 module for additional USB 3.2
Gen 1 ports on the front panel. The USB 3.2 Gen 1 connector provides data transfer
speeds of up to 5 Gb/s. The Type-A connector allows you to directly connect a USB
flash drive.
4.
Chassis Intrusion (2-pin INTRUSION1)
These leads are for the intrusion detection feature for chassis with intrusion sensor or
microswitch. When you remove any chassis component, the sensor triggers and sends
a high level signal to these leads to record a chassis intrusion event. The default setting
is to short the CHASSIS# and the GND pin by a jumper cap to disable the function.
ASUS RS720A-E12 Series
4-15