Table of Contents
Advertisement
2.5.3
Installing an expansion card to riser card bracket 3
(for model without rear bay only)
To install an expansion card on the riser card bracket 3:
1.
Remove the two screws that
secure the riser card bracket 3 to
the chassis.
2.
Firmly hold the riser card bracket 3, then pull it up to detach it from the PCIE4 slot on
the motherboard.
3.
Remove the screw from the
metal cover (A), then remove the
metal cover (B) from the riser
card bracket 3.
2-28
Riser card bracket 3
Chapter 2: Hardware Information
Metal cover
Advertisement
Table of Contents
