Asus RS720A-E12 Series User Manual page 40

7. Slide the carrier frame with CPU into the
rail frame, then remove the PnP cap.
The carrier frame with CPU fits in only
one correct orientation. DO NOT force
the carrier frame with CPU into the
rail frame.
8. Gently close the rail frame just enough
to let it sit on top of the CPU socket.
9. Close the load plate just enough to let
it sit on top of the CPU, then secure
the load plate using the screw on the
socket.
The load plate screws are T20
models. A torque value of 13.5±1.0kg-
cm (11.7±0.9 lbf-in) is recommended.
2-10
Carrier frame
with CPU
Chapter 2: Hardware Information