Connecting The Scanner To The Network; Before Making Network Connection - Epson ES-C320W User Manual

Administrator Information

Connecting the Scanner to the Network

Connect the scanner to the network by using the scanner's control panel.
See Related Information for more details.
Note:
If your scanner and computer are in the same segment, you can also connect using the installer.
To start the installer, access the following website, and then enter the product name. Go to Setup, and then start setting up.
https://epson.sn
Related Information
"Connecting to the Wireless LAN (Wi-Fi)" on page 99
&

Before Making Network Connection

To connect to the network, check the connection method and setting information for connection in advance.
Gathering Information on the Connection Setting
Prepare the necessary setting information to connect. Check the following information in advance.
Divisions
Network connection
information
Wi-Fi connection
information
DNS server information
>

Connecting the Scanner to the Network

Items Note
❏ IP address
Decide the IP address to assign to the scanner.
❏ Subnet mask
When you assign the IP address statically, all values are required.
❏ Default gateway
When you assign the IP address dynamically using the DHCP function,
this information is not required because it is set automatically.
❏ SSID
These are the SSID (network name) and the password of the access
point that the scanner connects to.
❏ Password
If MAC address filtering has been set, register the MAC address of the
scanner in advance to register the scanner.
See the following for the supported standards.
"Network Specifications" on page 209
❏ IP address for
These are required when specifying DNS servers. The secondary DNS
primary DNS is set when the system has a redundant configuration and there is a
secondary DNS server.
❏ IP address for
secondary DNS If you are in a small organization and do not set the DNS server, set
the IP address of the router.
>
Before Making Network Connection
169