Placing Irregular Shaped Originals - Epson ES-C320W User Manual

Placing Originals
>
Note:
❏ Envelopes that are not cut cleanly at the flap edge when they are opened may not be scanned correctly.
❏ Envelopes that have not yet been sealed can be loaded with the flap open and facing up.
6. Adjust the edge guides to fit the edges of the envelope so that there are no gaps. Otherwise, the envelope may
be fed skewed.
Note:
❏ If the edge guides are too far apart or too tight, the original may not be fed correctly. The edge guides should be
aligned so that they lightly touch the edges of the original.
❏ We recommend selecting the appropriate rotation angle or Auto as the Rotate setting in the application.
❏ When scanning envelopes, make the appropriate settings on the Epson Scan 2 screen.
When you are using Epson ScanSmart, you can open the Epson Scan 2 screen by clicking the Settings button >
Scanner Settings tab > Scan Settings.
Select Main Settings tab > Detect Double Feed > Off. See the Epson Scan 2 help for details.
If you have not disabled Detect Double Feed on the Epson Scan 2 screen and a double feed error occurs, remove the
envelopes from the ADF and reload them.

Placing Irregular Shaped Originals

Note:
Make sure there is enough space in front of the scanner for the ejected originals.
1. Make sure the scanner position light (
Placing Originals in the Scanner
) is on.
>
Placing Irregular Shaped Originals
79