Lights - Epson ES-C320W User Manual

Scanner Basics
>
Buttons and Lights on the Control Panel
B
Wi-Fi connect button
C Wi-Fi on/off button
D
Stop button
E Start button
Additional functions are available with different combinations of buttons.
+
+
Related Information
"Adding or Replacing the Computer or Devices" on page 160
&
"Resetting the Administrator Password" on page 12
&

Lights

Hold down the and
(WPS). See Related Information below for more details.
Turn on the scanner while holding down the
settings and the administrator password. This also turns off the panel lock function.
>
Lights
Press the WPS button on the access point, and then press
the button for more than three seconds to connect to a
Wi-Fi network. See Related Information below for more
details. Press the button to cancel the settings.
Press this button for more than three seconds to turn off the
wireless signal. Press again to turn on the signal.
❏ Cancels scanning.
❏ Finishes Automatic Feeding Mode.
❏ Cancels Wi-Fi settings by push button setup (WPS).
❏ Press this to release the error when a network connection
error occurs.
❏ Cancels a firmware update over a network connection.
❏ Starts scanning.
❏ Press this when cleaning the inside of the scanner.
buttons for more than three seconds to start PIN Code Setup
button to restore the default network
26