Audio dubbing
You can record an audio sound to add to the original sound on a tape by connecting
audio equipment or a microphone. If you connect audio equipment, you can add sound
to your recorded tape by specifying the starting and ending points. The original sound
will not be erased. You can also use the Remote Commander for this operation.
Connecting the microphone with the MIC jack
MIC (PLUG IN POWER)
: Signal flow
You can check the picture on TV by connecting with the video jack. You cannot monitor
the additional sound by the speaker. Use the headphone jack.
Connecting the audio equipment with the MIC jack
MIC
Set the MIC/LINE
switch to LINE.
: Signal flow
Microphone (not supplied)
LINE
MIC
LINE
Set the MIC/LINE
switch to MIC.
Audio equipment
(not supplied)
MIC (PLUG IN
POWER)
LINE OUT
L
R
93