Sony Handycam DCR-VX2000 Operating Instructions Manual page 85

Dubbing only desired scenes – Digital program editing
To cancel erasing all programs
Select RETURN in step 2, then press the SEL/PUSH EXEC dial.
To cancel a program you have set
Press MENU.
The program is stored in memory until the tape is ejected.
Operation 2: Performing a digital program editing (Dubbing a
tape)
Make sure your camcorder and VCR are connected, and that the VCR is set to recording
pause. When you use an i.LINK cable (DV connecting cable), you do not have to set the
VCR to recording pause.
When you use a video camera recorder, set its POWER switch to VCR.
(1) Select VIDEO EDIT. Turn the SEL/PUSH EXEC dial to select START, then press the
dial.
(2) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.
The camcorder automatically searches for the beginning of the first program, then
starts dubbing.
The EXECUTING indicator flashes.
The SEARCH indicator appears during search, and the EDIT indicator appears
during edit on the LCD screen or in the viewfinder.
The program marks light up after dubbing is complete.
When the dubbing ends, your camcorder and the VCR automatically stop.
To stop dubbing
Press x on this camcorder or on the Remote Commander.
To end the digital program editing function
Your camcorder stops when the dubbing is complete. Then the display returns to
VIDEO EDIT in the menu settings.
Press MENU to end the digital program editing function.
When the operations of the VCR do not work with an i.LINK cable
Keep the i.LINK connection, and carry out Preparation 2 (p. 76) again.
You cannot record on the VCR when:
• The cassette is not inserted.
• The tape has run out.
• The write-protect tab is set to the protect position.
• The IR SETUP code is not correct. (When IR is selected.)
• The setup to cancel recording pause is not correct (p. 78). (When IR is selected.)
NOT READY appears on the LCD screen when:
• The program to operate the digital program edit has not been made.
• i.LINK is selected but an i.LINK cable (DV connecting cable) is not connected. (When
i.LINK is selected.)
• The power of the connected VCR is not turned on.
85