Dubbing Only Desired Scenes - Digital Program Editing - Sony Handycam DCR-VX2000 Operating Instructions Manual

Dubbing only desired scenes – Digital
program editing
You can duplicate selected scenes (programs) for editing onto a tape without operating
the VCR. Scenes can be selected by frame.
[a]
[a] Undesired frame
[b]Moves the scene
Before operating the digital program editing
Preparation 1 Connecting the VCR (p. 73, 74).
Preparation 2 Setting the VCR to operate by infrared rays emitter (p. 76)/Setting the
VCR to operate with an i.LINK cable (DV connecting cable) (p. 80).
Preparation 3 Adjusting the synchronization of the VCR (p. 81).
When you dub using the same VCR again, you can skip Preparations 2 and 3.
Using the digital program editing function
Operation 1 Making programs (p. 83).
Operation 2 Performing a digital program editing (Dubbing a tape) (p. 85).
Notes
•You cannot dub the titles, display indicators, or the contents of cassette memory.
•When you connect with an i.LINK cable (DV connecting cable), you may not be able to
operate the dubbing function correctly, depending on the VCR.
Set CONTROL to IR in the menu settings of your camcorder.
•You cannot send the control signal of the digital program editing through the
(LANC) jack.
If you connect using an i.LINK cable (DV connecting cable)
With digital-to-digital connection, video and audio signals are transmitted in digital
form for high-quality editing.
Preparation 1: Connecting the VCR
Connect your camcorder and the VCR as shown on pages 73 and 74.
You can use an A/V connecting cable, or an i.LINK cable (DV connecting cable).
[a]
[b]
75