Sony Handycam DCR-VX2000 Operating Instructions Manual page 79

Dubbing only desired scenes – Digital program editing
Confirming the VCR operation
(1) Insert a recordable tape into the VCR, then set it to recording pause.
(2) Turn the SEL/PUSH EXEC dial to select IR TEST, then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.
If the VCR starts recording, the setting is correct.
When finished, the indicator changes to COMPLETE.
When the VCR does not operate correctly
Set the IR SETUP code, or select the button to cancel the recording pause on the VCR.
2,3
OTHERS
ED I T SET
CONTROL
ADJ TEST
"CUT–I N"
"CUT–OUT" ENGAGE
I R SETUP REC PAUSE
PAUSEMODE
I R TEST RETURN
RETURN EXECUTE
[ MENU ] : END
OTHERS
ED I T SET
CONTROL
ADJ TEST
"CUT–I N"
"CUT–OUT"
I R SETUP
PAUSEMODE
I R TEST COMPLETE
RETURN
[ MENU ] : END
79