Searching For A Recording By Index - Index Search - Sony Handycam DCR-VX2000 Operating Instructions Manual

Searching for a recording by index
– Index search
You can automatically search for the point where an index is marked and start playback
from that point (Index search). Use a tape with cassette memory for convenience. Use
the Remote Commander for this operation.
Use this function to check where indexes are marked or to edit the tape at each
sequence where the index is marked.
Searching for the index point using cassette memory
You can use this function only when playing back a tape with cassette memory (p. 143).
(1) Set the POWER switch to VCR.
(2) Set CM SEARCH in
is ON.
(3) Press SEARCH MODE on the Remote Commander repeatedly, until the index
search indicator appears.
The indicator changes as follows:
INDEX SEARCH t TITLE SEARCH t DATE SEARCH t PHOTO SEARCH
t PHOTO SCAN t no indicator
(4) Press . or > on the Remote Commander to select the index point for
playback.
Your camcorder automatically starts playing back at the selected index point.
1
POWER
To stop searching
Press x.
64
to ON in the menu settings (p. 107). The default setting
4
3
INDEX SEARCH
1 SEP / 5 / 00
SEARCH
2 SEP / 6 / 00
MODE
3 DEC / 24 / 00
4 JAN / 1 / 01
5 FEB / 11 / 01
6 APR / 29 / 01
INDEX SEARCH
1 SEP / 5 / 00
2 SEP / 6 / 00
3 DEC / 24 / 00
4 JAN / 1 / 01
5 FEB / 11 / 01
6 APR / 29 / 01
CH
5 : 30PM CAM
8 : 50AM LINE
10 : 30AM CAM
11 : 25PM CAM
4 : 11PM CAM
CAM
1 : 45PM
CH
5 : 30PM CAM
8 : 50AM LINE
10 : 30AM CAM
11 : 25PM CAM
4 : 11PM CAM
1 : 45PM CAM