Sony Handycam DCR-VX2000 Operating Instructions Manual page 70

Searching for a photo – Photo search/Photo scan
Searching for a photo without using cassette memory
(1) Set the POWER switch to VCR.
(2) Set CM SEARCH in
(3) Press SEARCH MODE on the Remote Commander repeatedly, until the photo
(4) Press . or > on the Remote Commander to select a photo for playback.
To stop searching
Press x.
Scanning photo
(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE on the Remote Commander repeatedly, until the photo
(3) Press . or > on the Remote Commander.
1
POWER
To stop scanning
Press x.
70
search indicator appears.
The indicator changes as follows:
INDEX SEARCH t DATE SEARCH t PHOTO SEARCH t PHOTO SCAN
t no indicator
Each time you press . or >, your camcorder searches for the previous or
next photo.
Your camcorder automatically starts playback of the photo.
scan indicator appears.
The indicator changes as follows:
INDEX SEARCH t TITLE SEARCH t DATE SEARCH t PHOTO SEARCH
t PHOTO SCAN t no indicator
Each photo is played back for about five seconds automatically.
to OFF in the menu settings (p. 107).
2
SEARCH
MODE
3
PHOTO 00
SCAN