Disassembly - M&C TEC1 Series Operation Manual

Disassembly

Note
Before disassembling the pump, follow these warnings and safety instructions:
Warning
Danger
You can disassemble the pump now.
22
Before switching off the pump (decommissioning), the pump needs to be
purged with inert gas or air, and it needs to be dried.
Aggressive condensate possible.
Chemical burns possible due to aggressive media!
For general electrical and mechanical work on the pump, wear personal
protective equipment (PPE) in accordance with the risk assessment.
High voltage!
Working without disconnecting the power supply may cause an elec-
trical shock. Disconnect power supply before any assembly, mainte-
nance or disassembly.
Secure the pump against accidental restart.
There may be harmful sample gases in the pump. Prevent potentially
harmful gases from escaping the open sample gas lines during disas-
sembly.
MP- 4.01 www.mc-techgroup.com