Cleaning The Pump Head; Repair Information - M&C TEC1 Series Operation Manual

15.3 CLEANING THE PUMP HEAD

When changing flexible tube or other parts, inspect all parts for dirt before assembling the pump
head and clean them if necessary.
We recommend to clean the parts with a dry cloth. Solvent should not be used, because it can
damage the plastics and synthetic rubber parts. Use oil-free compressed air to clean the parts
if available.

16 REPAIR INFORMATION

When sending the peristaltic pump to M&C customer service for repair, please
indicate the type of medium pumped. Before shipping the pump, please remove
Note
hazardous or aggressive contaminations from all parts of the pump!
www.mc-techgroup.com
Aggressive condensate possible!
Media residues in tubing!
Chemical burns caused by aggressive media possible!
Wear protective gloves and protective glasses!
Wear proper protective clothing!
SR25.X-X | 1.01.01 21