GENERAL INFORMATION
Please take care of the following basic safety procedures when mounting, starting up or operating this
equipment:
•
Read this operating manual before starting up and using the equipment. The information and warnings
given in this operating manual must be heeded.
•
Any work on electrical equipment is only to be carried out by trained specialists as per the regulations
currently in force.
•
Check the details on the type plate to ensure:
o The equipment is connected to the correct main voltage.
o The equipment is suitable for the hazardous area classification.
Protection against touching dangerously high electrical voltages:
•
Before opening the equipment, it must be switched off and hold no voltages. This also applies to any
external control circuits that are connected.
•
The device is only to be used within the permitted range of temperatures and pressures.
•
Check that the location is weather-protected. It should not be subject to either direct rain or moisture.
•
Installation, maintenance, monitoring and any repairs may only be done by authorized personnel with
respect to the relevant stipulations.
6