Technical Data - M&C TEC1 Series Operation Manual

Technical data

Bellows pump
Part no.
Part no. with needle valve
MP-F../R
Voltage
Voltage tolerance
Degree of protection
Capacity max.
Operating pressure
Gas temperature
Ambient temperature
Storage temperature
Sample gas connections
Gas tightness of pump head
Power consumption
Cos
Current consumption
Cable fittings
Electrical equipment stand-
ard
Material of sample gas con-
tacting parts
Weight
Options
05 P 1050
05 P 1060
05 P 1070
Material abbreviations according to ISO 1629 and 1043.1
www.mc-techgroup.com
MP-F05 /230 V MP-F05 /115 V MP-F10 /230 V
05 P 1000 05 P 1000a
05 P 1010 05 P 1010a
230 V 50 Hz 115 V 60 Hz
In accordance with IEC 60034-1 Voltage ±5 % Frequency ±2 %
320 Nl/h (approx. 5 l/min)
Liter capacity with a counter pressure
of ±50 mbar on the vacuum and pres-
sure side
max. 0.4 to 2.2 bar abs.
-30 to +100 °C (approx. -22 °F to 212 °F) for dry sample gas
+10 °C to +50 °C / 0 °C to +50 °C for dry sample gas
(+50 °F to + 122 °F / +32 °F to + 122 °F for dry sample gas)
installation altitude of < 1000 m (< 3281 ft.) above sea level
-20 to +60 °C (approx. -4 to +140 °F)
0.94
0.30 A 0.57 A
M20 x 1.5 clamp range 5.5
PTFE, PFA, FEP (+PVDF for type /R)
4.7 kg 4.35 kg
(10.36 lbs) (9.59 lbs)
Mounting bracket with 4 anti-vibration pads for bellows pump MP-F
Extra charge for upper pump head of bellows pump MP-F out of stain-
less steel
Extra charge for upper pump head of bellows pump MP-F../R out of
stainless steel with needle valve out of PVDF
MP- | 1.04.01
05 P 1005
05 P 1015
230 V 50 Hz
IP 55 - DIN 40050
600 Nl/h (approx. 10 l/min)
Liter capacity with a counter pres-
sure of ±50 mbar on the vacuum
and pressure side
max. 0.2 to 3.2 bar abs.
i DIN ISO 228/1
< 6 x 10 -3 mbar l/s
65 W
0.98 0.94
0.30 A
10 mm
EN 60204-1
4.7 kg
(10.36 lbs)
MP-F10/115 V
02 P 1005a
05 P 1015a
115 V 60 Hz
0.98
0.57 A
4.35 kg
(9.59 lbs)
11