Table of Contents
Advertisement
GS-SR125ED System Installation Guide
5.6.
PCI Expansion Card Installation
GS-SR125E provides expansion riser slots for 3 peripheral cards,
Up to 100 MHz with one PCI card, up to 66 MHz with two PCI
cards for full-height, Up to 100 MHz with one PCI card for Low-
profile. To install the peripheral, please go through the following
steps.
Step 1. There are screws holding the riser bracket. Remove the
screw on the top of the bracket.
Step 2. Pull the bracket straight up. (Fig-13)
Figure 12
Figure 13
15
Advertisement
Table of Contents
