Table of Contents
Advertisement
5.3.
CPU Installation
Step 1. Please make sure the CPU type and speed that are
supported by the motherboard.
Step 2. To Install the CPU(s), lift up the bar that located next to
the socket. (Fig-3)
Step 3. The noticed corner should point toward the end of lever.
The CPU will only fit in the orientation as shown below. (Fig-4)
Step 4. Then, align the CPU and insert it into the socket. (Fig-5)
Push the lever back to the original position. (Fig-6)
GS-SR125ED System Installation Guide
Figure 3
Figure 4
12
Advertisement
Table of Contents
