GS-R227E-RH Rack Mount Server
Step 2-5: PCI Expansion Card Installation
GS-R227E-RH provides expansion riser slots for one PCI-E x8 slot; and one with PCI-E x8 slot (at x1
bandwidth). To install the peripheral, please go through the following steps.
Step 1 Loosen the two riser bracket screws. (See illustrated below)
Step 2 Loosen another four riser bracket screws. (See illustrated below)
Step 3 Lift the riser bracket slightly, then pull it out from the server chassis.
Align the expansion card with the guiding groove. Slide the expansion card into the slot until the
card firmly seats.
Step 4 Align the riser bracket to the system module.
1
2
2
1 5
2 2
1
3