Table of Contents
Advertisement
GS-SR125ED System Installation Guide
5.11. Floppy Drive Installation (Optional)
Step 1. Remove three screws on the front top cover, (Fig-26)
Push down the two buttons located at two sides of the system to
remove front top cover. (Follow the arrow direction shown in Fig-
27)
Figure 26
Step 2. Insert the floppy disk drive into the tray. Secure the floppy
disk drive with screws (Fig-28). Connect cables to the floppy disk
drive. (Fig-29)
Figure 28
Figure 27
Figure 29
23
Advertisement
Table of Contents
