Table of Contents
Advertisement
GS-SR125ED System Installation Guide
Figure 5
Figure 6
5.4.
Heat Sink Installation
Step 1. Put the Heat sink on the CPU. (Fig-7)
Figure 7
Figure 8
Step 2. There are for screws hold the retention modules. Seat the
heat sink firmly in the retention modules with the two cooler
brackets.
Step 3. First, hook one end of the cooler bracket to the CPU
socket as shown in the Fig-8. Make sure the middle part of
bracket is push into the desired position. (Fig-8)
13
Advertisement
Table of Contents
