Table of Contents
Advertisement
GS-SR222 System Installation Guide
5.4. Memory Installation
The motherboard contains six DIMM (Dual Inline Memory Module)
sockets. The systems BIOS will auto detect the size if the memory
after installing. To install memory, simply push the memory
modules into the DIMM sockets. (Fig -11 to12)
Figure 11
Figure 12
5.5. PCI Expansion Card Installation
GS-SR222 provides expansion riser slots for two peripheral cards,
64Bit/66 MHz full-height. To install the peripheral, please go
through the following steps.
Step 1. There are three screws holding the riser bracket. First,
remove the screw on the top of the bracket, then, remove another
two screws located at the rear of the server. (Fig -13 to 15).
15
Advertisement
Table of Contents
