Gree Dettson LOMO 19 Installation Manual page 98

Service Manual
Step
3. Remove panel
Open the front panel; separate the panel rotation shaft
from the groove fixing the front panel and then removes
the front panel.
Note:
The display of some models is fixed on the panel;
unscrew the screws fixing the display on the panel
before removing the panel.
4. Remove electric box cover 2
Remove the screws on the electric box cover 2 to
remove the electric box cover 2.
5. Remove front case sub-assy
Remove the screws fixing front case.
a
Note:
(1) Open the screw caps before removing the screws
around the air outlet.
(2) The quantity of screws fixing the front case sub-
assy is different for different models.
Loosen the clasps at left, middle and right sides of front
b
case. Life the front case sub-assy upwards to remove
it.
Installation and Maintenance
Procedure
Panel rotation
Front case
sub-assy
Screws
Left clasp Middle clasp
Display
Panel
Screw
Electric box cover 2
Screws
Screw caps
Right clasp
Screw
95