Gree Dettson LOMO 19 Installation Manual page 103

Step
4. Remove front panel assy
Remove connection screws connecting the front panel
assy, and then remove the front panel assy.
5. Remove right side plate assy
Rescrew the ground screws, remove the ground wires,
loosen the screws fixing terminal board, remove the
terminal board, rescrew the screws fixing the right side
plate, and remove the right side plate assy.
6. Remove axial flow fan
Remove the nut on the fan and then remove the axial
flow fan.
100
Procedure
Front panel
Axial flow fan
Service Manual
Right side plate
Installation and Maintenance