Service Manual
Step
7. Remove evaporator assy
a
Remove 2 screws fixing evaporator assy.
At the back of the unit, Loosen the clasp of the
connection pipe clamp and then remove the connection
b
pipe clamp.
First remove 3 screws fixing evaporator assy and motor
press plate.And then remove the left side of evaporator
c
from the groove of bottom shell. At the last, remove the
right side from the clasp on the bottom shell.
Adjust the position of connection pipe on evaporator
slightly and then lift the evaporator upwards to remove
it.
d
Installation and Maintenance
Procedure
Screws
Clasp
Connection pipe
Connection pipe clamp
Screws
97