HP ProBook x360 11 G3 Education Edition Maintenance And Service Manual page 57

b. Remove the display bezel (4).
The display bezel is available using spare part number L43791-001.
Display bezel adhesive is included in the Miscellaneous Kit, spare part number L43802-001.
10. If it is necessary to replace the G-sensor module from the bottom of the display assembly:
a. Use a tool (1) to detach the G-sensor module from the display back cover (2). The G-sensor module
is secured to the display back cover with double-sided adhesive.
b. Disconnect the cable from the G-sensor module (3).
The G-sensor module is available using spare part number L43794-001.
11. If it is necessary to replace the LED board from the top of the display assembly:
a. Disconnect the cable (1) from the LED board.
b. Detach the LED board (2) from the display back cover. (The LED board is secured to the display back
cover with double-sided adhesive.)
Component replacement procedures 49