Solid-State Drive - HP ProBook x360 11 G3 Education Edition Maintenance And Service Manual

Solid-state drive

Table 5-6 Spare part description and number
Description
256-GB, M.2, SATA-3 solid-state drive
128-GB, M.2, SATA-3 solid-state drive
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly
2. Remove the keyboard/top cover (see
3. Remove the battery (see
Remove the solid-state drive:
1. Remove the Phillips M2.0 × 2.5 screw (1) that secures the solid-state drive to the bottom cover.
(The solid-state drive tilts up.)
2. Remove the solid-state drive (2) by pulling the drive away from the slot at an angle.
Reverse this procedure to install the solid-state drive.
34 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
(Preparation for disassembly on page
Keyboard/top cover on page
Battery on page 33).
Spare part number
L43788-001
L43787-001
26).
26).