Touchpad - HP ProBook x360 11 G3 Education Edition Maintenance And Service Manual

TouchPad

NOTE: The TouchPad spare part kit does not include the TouchPad bracket or the TouchPad cable.
Table 5-3 Spare part description and number
Description
TouchPad (does not include cable or bracket)
TouchPad cable (included in Cable Kit)
TouchPad bracket (included in Bracket Kit)
Before removing the TouchPad, follow these steps:
1. Prepare the computer for disassembly
2. Remove the keyboard/top cover (see
Remove the TouchPad:
1. Position the keyboard/top cover upside down with the front edge toward you.
2. Disconnect the cable from the ZIF connector on the TouchPad (1).
3. Lift the clear tape from the top of the TouchPad (2).
4. Remove the six Phillips M2.0 × 2.3 screws (1) that secure the TouchPad and TouchPad bracket to
the keyboard/top cover.
5. Remove the TouchPad bracket (2).
(Preparation for disassembly on page
Keyboard/top cover on page
Spare part number
L43778-001
L43783-001
L43792-001
26).
26).
Component replacement procedures 29