Special Accessories; Troubleshooting - Bosch MUC8 Series Instruction Manual

en Special accessories

Special accessories

*The storage lid is not supplied as standard with the appliance. It is only supplied with pans as a special
accessory. If an accessory is not included in the product package, it can be purchased via trade stockists or
customer service.

Troubleshooting

Problem
The prepared meal is
half-raw.
The prepared meal is burnt. There is dirt underneath the pan.
The appliance boils over.
LED does not light up.
The hotplate does not
function.
Water is flowing out of the
appliance.
28
MUC6_MUC8_EU2_8001036705.indb 28
MAZ8BI
Stainless steel pan, polished, with a
non-stick coating and storage lid*;
suitable for the induction multi-cooker
with steam pressure function MUC88...
MAZ0FB
Deep frying basket
Cause
Filled beyond capacity.
The ratio of the amount of water
and the ingredients is incorrect.
Foreign objects in the appliance
interior.
The pan is deformed.
Fault in the appliance.
Fault in the sensor.
The pan is deformed.
Fault in the appliance.
Fault in the sensor.
Filled beyond capacity.
The temperature is too high.
The selected preparation
programme requires the meal to be
cooked with the lid open.
The appliance is switched off.
Fault in the power cord.
Fault in the appliance.
The hotplate is damaged.
The appliance features overflow
protection.
The condensation tank is full and
overflowing.
5-litre pan; dishwasher-safe; very robust pan;
3 mm thick; stainless steel polished exterior;
non-stick coating; lid* for the practical storage
of food in the pan, e.g. in the refrigerator
Stainless steel basket with removable handle
for easy handling; dishwasher-safe
Remedy
Do not fill the pan beyond the marking
[ 4.0 litres ]!
Adjust the ratio of the amount of water
and the ingredients.
Remove all foreign objects. Do not use
any water for this purpose!
Contact customer service.
Thoroughly clean the pan and the
appliance interior.
Contact customer service.
Adjust the amount.
Reduce the temperature.
Open the lid of the appliance.
Switch on the appliance.
Contact customer service.
Contact customer service.
Remove water from condensation tank.
Remove the pan and use a cloth to rub
the appliance interior dry. Ensure that no
water enters the appliance interior.
15.03.2016 14:46:29