Table of Contents
Advertisement
Manage do not disturb while in connection
Press the
not disturb
The room number corresponding to the call in speech is pre-entered. You,
as a receptionist, can change the room number. Press
room number.
➔
The terminal displays the screen for activating or deactivating do not disturb.
Confirm the activation or deactivation by pressing Yes.
➔
Calling a room with do not disturb active
There is an emergency and you want to call a room for which do not disturb
is active. You, as a receptionist, can make a call, but, are warned that do not
disturb is active for the room before the call is made.
Dial the room's phone number or press the busy lamp field key set for the
room to make a call.
➔
Press the
➔
➔
Additional settings
You can make further settings or modifications in the reception
menu.
Room configuration
In the
following entries:
•
Room
Occupied.
Mitel 6940 SIP
eud-1765/2.0 – R6.0 – 06.2018
Do not disturb
on the reception phone.
You can use the
Room list
The do not disturb function is activated or deactivated.
The terminal displays the screen indicating that do not disturb is active for
this room.
Call room
softkey to proceed with the call.
The room telephone rings.
The terminal displays the normal calling screen.
Room configuration
state: Occupancy status of the room. The room is either Free, or
function key or go to
key to search for the room.
of a certain room you can view and modify the
Reception phone
Menu
>
Reception menu
Ok
to confirm the
>
Do
125
Advertisement
Table of Contents
