Mitel 6940 SIP User Manual page 42

Phoning
Menu
Permanent
Per call
You must save this function to a configurable key using Self Service Portal
(see chapter "Configuring or deleting a key assignment", page 102).
Notes: • Your call number can only be hidden if you select an external call num-
ber.
• This feature depends on the range of services offered by your provider.
Activating/deactivating calling line identification restriction permanently:
Press the function key for
➔
Function is activated/deactivated. You phone number is hidden in all outgoing
calls.
Activating CLIR per call:
1. Press the function key for
2. Enter the call number and press the
➔
Putting a call partner on hold
You want to briefly interrupt the active call.
You can put the call party on hold and then take them back again on the
same phone.
Putting the active call party on hold:
Press the Hold key.
➔
The call party is put on hold, is displayed and the LED of the line key flashes.
Take back the call party on hold:
Press the Hold key, the flashing line key, or the
➔
The call is active again.
42
Description
The call number is never displayed.
Call number should only be restricted for certain calls.
This function must be activated before dialing the call
number.
Call number is dialed and your number is not displayed to the called party.
Hide number.
Hide number.
Select softkey.
Pick up softkey.
eud-1765/2.0 – R6.0 – 06.2018
Mitel 6940 SIP