How To Use The Conventional Oven - CDA PC 15 SS User Operating Instructions Manual

How to use the Conventional oven

General features
As its name indicates, this is an oven that presents particular features from an operational
point of view.
The conventional oven is provided with 3 heating elements which are:
– Bottom element
– Top element
– Grill element
– Oven lamp
Note:
Upon first use, it is advisable to operate the oven at the maximum temperature (thermostat
knob on position 250) for 60 minutes in the position
position to eliminate possible traces of grease on the heating elements.
WARNING:
The door is hot, use the handle.
Thermostat knob
This only sets the cooking temperature and does not switch the oven on.
Rotate clockwise until the required temperature is reached (from 50 to 250°C).
The light between the thermostat and the function selector will illuminate when the oven is
switched on and turns off when the oven reaches the correct temperature.
The light will cycle on and off during cooking in line with the oven temperature.
Fig. 22
22
800 W
700 W
1450 W
15 W
(Fig. 23)
and for another 15 minutes in the
ATTENTION - MOST IMPORTANT
Pay special attention not to touch the
hot heating element inside the oven
cavity.
250
225
200
175
50
75
100
125
150
Fig. 23