How To Use The Conventional Oven - CDA PC 16 2 SS User Operating Instructions Manual

How to use the Conventional oven

General features
As its name indicates, this is an oven that presents particular features from an operational
point of view.
The conventional oven is provided with 3 heating elements which are:
– Bottom element
– Top element
– Grill element
Note:
Upon first use, it is advisable to operate the oven at the maximum temperature (thermostat
knob on position 250) for 60 minutes in the position
position to eliminate possible traces of grease on the heating elements.
WARNING: The door is hot, use the handle.
Function selector knob
Rotate the knob clockwise to set the oven for one of the following functions.
Thermostat knob
This only sets the cooking temperature and does not switch the oven on.
Rotate clockwise until the required temperature is reached (from 50 to 250°C).
The light above the function selector will illuminate when the oven is switched on and turns
off when the oven reaches the correct temperature.
The light will cycle on and off during cooking in line with the oven temperature.
Fig. 22
22
800 W
700 W
1450 W
(Fig. 22)
(Fig. 23)
and for another 15 minutes in the
Fig. 23