Introduction; Assembling The Backguard - CDA PC 15 SS User Operating Instructions Manual

Introduction

Congratulations on your purchase of this
and produced to give you many years of satisfactory use.
Before using this appliance it is essential that the following instructions are carefully read and
fully understood.
We would emphasise that the installation section must be fully complied with for your safety
to ensure that you obtain the maximum benefits from your appliance.
Fig. 1
A
V
This cooker has been designed, constructed and marketed in compliance with:
- safety requirements of EEC Directive "Low voltage" 73/23;
- protection requirements of EEC Directive "EMC" 89/336;
- requirements of EEC Directive 93/68.
4
CDA cooker which has been carefully designed
B
Assembling the
backguard
Before installing the cooker,
assemble the backguard "V"
(fig. 1).
Please note that :
The backguard "V" can be
found packed at the rear of
the cooker.
Before assembling remove
any protective film/adhe-
sive tape.
The backguard must be
fixed to the cooktop using
the three supports "B" sup-
plied with the appliance
(see fig. 1).