Connect the drive SATA-power Y-cables
Prerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
Procedure
1. Connect the drive 2 SATA-power Y-cable:
a. Connect the cable to the drive 2 SATA connector.
b. Connect the cable to the drive 2 power connector.
c. Secure the power cable with the clip.
3
2. Connect the drive 1 SATA-power Y-cable:
a. Connect the cable to the drive 1 SATA connector.
b. Connect the cable to the drive 2 power connector.
c. Secure the power cable with the clip.
1
3
4
2
2
1
Connect the drive SATA-power Y-cables
35