Table of Contents
Advertisement
Available languages
Available languages
All Blodgett ovens are shipped in containers to
prevent damage. Upon delivery of your new oven:
Inspect the shipping container for external dam-
D
age. Any evidence of damage should be noted
on the delivery receipt which must be signed by
the driver.
Uncrate the oven and check for internal dam-
D
age. Carriers will accept claims for concealed
damage if notified within fifteen days of delivery
and the shipping container is retained for in-
spection.
Standard Components
Part Description
Main oven body
Nozzle (shipped installed)
Air plate (shipped installed)
Conveyor support angle
Drive side conveyor rack
Idle side conveyor rack
Rolled wire conveyor belt
Extra piece of wire conveyor belt
Packet containing: conveyor belt
inner and outer master links
Belt tensioners
Crumb pans
Product stop
Oven Supports (legs, casters)
Air Plate Hook
Packet containing: 12 3/8-16 hex
head bolts, lockwashers and wash-
ers for legs
Owner's manual
NOTE: *
shipped assembled for the optional
folding conveyor
NOTE: ** shipped with bottom or single section
ovens only.
The Blodgett Oven Company cannot assume
responsibility for loss or damage suffered in
transit. The carrier assumed full responsibility
for delivery in good order when the shipment
was accepted. We are, however, prepared to
assist you if filing a claim is necessary.
The oven can now be moved to the installation
site. Check the following list with Figure 2 on page
3 to be sure all items were received.
Qty.
1
Optional folding conveyor assembly
8
Stacking Kit
1
Packet containing: 4 alignment pins
2
Triple stack casters
1*
Optional remote operator control with
attached 50' cable
1*
Optional remote operator control for
1*
10' cable
1
Optional remote 10' cable
1*
Packet containing: optional remote
operator control cable clamps and
hardware
2*
2
Optional vent cover assembly or
chimney kit
1
NOTE: *** One required for double stacked units
4
1**
NOTE: **** Triple stacked units only
1
1
5
Installation
Delivery and Inspection
Options
Part Description
Two required for triple stacked units
Qty.
1
1***
1***
1****
1
1
1
1
1
Advertisement
Table of Contents
