Table of Contents
Advertisement
Available languages
Available languages
Installation
Electrical Connection
Before making any electrical connections to this
unit, check that the power supply is adequate for
the voltage, amperage, and phase requirements
stated on the rating plate.
The electrical installation must comply with the na-
tional local codes and installation requirements.
Wiring diagrams accompany this manual and are
attached inside the electrical box and on the rear
of the oven.
SG3240G
The SG3240G requires a 5 Amp, 50/60HZ, 1Φ,
208-240VAC, 3 wire service consisting of L1, L2
and ground. Wiring from the power source to
these units must be a minimum of #16 AWG CU.
stranded wire or larger.
U.S. and Canadian installations
SG3240G ovens are shipped with a 6' power cord
attached with a NEMA L6-15 locking plug.
WARNING!!
Incorrect single phase wiring with other
than 208 -- 240 VAC may result in exten-
sive damage to electrical components
and fire in the electrical box.
L1
L2
Supply
SG3240E Delta Power
U.S. and Canadian Installations (or similar)
L1
L2
Supply
L3
SG3240G
208-240
Oven
208 or 240
(typical)
Oven
SG3240E
Use 90_C rated cable. Size wire to National Elec-
tric or local codes.
The SG3240E is available in four electrical configura-
tions.
U.S. and Canadian installations (or similar)
69 amp, 50/60 HZ, 3Φ, 208 VAC, 4 wire service
D
consisting of L1, L2, L3, and ground.
80 amp, 50/60 HZ, 3Φ, 240 VAC, 4 wire service
D
consisting of L1, L2, L3, and ground.
General export and Australian installations
41.5 amp, 50/60 HZ, 3Φ WYE, 230/400 VAC, 5
D
wire service consisting of L1, L2, L3, Neutral and
ground.
40 amp, 50/60 HZ, 3Φ WYE, 240/415 VAC, 5
D
wire service consisting of L1, L2, L3, Neutral and
ground.
THE BLODGETT OVEN COMPANY CANNOT AS-
SUME RESPONSIBILITY FOR LOSS OR DAMAGE
SUFFERED AS A RESULT OF IMPROPER INSTAL-
LATION.
SG3240E Wye Power
General Export Installations
L1
L2
Supply
L3
N
Figure 21
24
230/
400/
240
415
400/415
Oven
400/415
Advertisement
Table of Contents
