Table of Contents
Advertisement
6
Cleaning and Maintenance
6.1
Safety Instructions for Cleaning
•
Before cleaning, disconnect the appliance from the power supply.
•
Leave the appliance to cool down completely.
•
Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
•
Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
•
For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
6.2
Cleaning
1. At the end of a working day, clean the appliance thoroughly.
2. Remove food products from the refrigerated display and store them temporarily
EN
in a refrigerator to prevent their deterioration.
3. For cleaning, remove the rear sliding glass pane door from the appliance by
sliding it upwards and pulling it forwards.
4. Clean the sliding glass pane door with warm water and a soft, damp cloth. Use a
mild cleaning agent when required.
5. Use a soft, damp cloth to wipe the inside and the outside of side glass panes, as
well as front lifting door.
6. Use a soft, damp cloth to wipe the bottom display area, housing and frame of
the appliance as well.
7. Wipe cleaned parts and surfaces with a cloth moistened in fresh water.
8. Finally, thoroughly dry all cleaned parts and surfaces with a soft cloth.
18 / 22
Cleaning and Maintenance
700246G
Fig. 4
Advertisement
Table of Contents
