Advertisement
Quick Links
RK 24008
200 Series Checkball Kit
Instruction Part Number 14380 Rev -
Product
Information:
200 Series checkballs are
made with a high-performance
fluorocarbon (FKM) material that
offers outstanding chemical
and heat resistance properties,
compression set, and compatibility
with petroleum based oils, fuels,
and biodiesels.
Contact Information:
Parker Hannifin Corporation
Racor Division
P.O. Box 3208
3400 Finch Road
Modesto, CA 95353
phone 800 344 3286
209 521 7860
fax 209 529 3278
racor@parker.com
www.parker.com/racor
Installation Instructions:
The engine should be off and cool
to the touch.
1.
In a counter-clockwise rotation,
remove the checkball cap and
set aside.
2.
Remove existing checkball and
discard properly.
3.
Place new checkball in port.
4.
Lubricate o-ring on checkball
cap with motor oil or clean fuel.
5.
Thread checkball cap into
mounting head in a clockwise
rotation. Tighten firmly - do not
over tighten.
6.
Start engine and check for leaks.
Correct as necessary with
engine off.
Advertisement
Related Manuals for Parker Racor 200 Series
Summary of Contents for Parker Racor 200 Series
- Page 1 Contact Information: Installation Instructions: The engine should be off and cool Lubricate o-ring on checkball Parker Hannifin Corporation to the touch. cap with motor oil or clean fuel. Racor Division P.O. Box 3208 3400 Finch Road...
- Page 2 USAGE. specifications, designs, comparable new product or availability and pricing, are repair the defective product. subject to change by Parker This express warranty shall be Warning Hannifin Corporation and inapplicable to any product not its subsidiaries at any time...