RK 24008
200 Series Checkball Kit
Instruction Part Number 14380 Rev -
Product
Information:
200 Series checkballs are
made with a high-performance
fluorocarbon (FKM) material that
offers outstanding chemical
and heat resistance properties,
compression set, and compatibility
with petroleum based oils, fuels,
and biodiesels.
Contact Information:
Parker Hannifin Corporation
Racor Division
P.O. Box 3208
3400 Finch Road
Modesto, CA 95353
phone 800 344 3286
209 521 7860
fax 209 529 3278
racor@parker.com
www.parker.com/racor
Installation Instructions:
The engine should be off and cool
to the touch.
1.
In a counter-clockwise rotation,
remove the checkball cap and
set aside.
2.
Remove existing checkball and
discard properly.
3.
Place new checkball in port.
4.
Lubricate o-ring on checkball
cap with motor oil or clean fuel.
5.
Thread checkball cap into
mounting head in a clockwise
rotation. Tighten firmly - do not
over tighten.
6.
Start engine and check for leaks.
Correct as necessary with
engine off.