Page 2
The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors.
Current input ISO 6264 4...20 mA Code Seal Code Pressure stage 105 bar Pilot oil 175 bar Code Pilot Drain 250 bar internal external 350 bar internal internal external drain with pipe only RE_-R_V obe_24-45-A-B 5715-651 UK 29.01.19 Parker Hannifin Corporation...
105 bar 175 bar 250 bar Code Command signal 350 bar Voltage input 0...+10 V with reference output +10 V Code Seal Current input 4...20 mA With poppet seal. Not for NG16 RE_-R_V obe_24-45-A-B 5715-651 UK 29.01.19 Parker Hannifin Corporation...
105 bar internal 210 bar external from subplate 350 bar external from valve body (Y-port) 1) Other pressure stages on request 2) Only R4V 3) Only R6V 4) R4V: Adjustment with acorn nut RE_-R_V obe_24-45-A-B 5715-651 UK 29.01.19 Parker Hannifin Corporation...
M = G¼ 350 bar 1) Only R5V 3port 2) Y1 only available at external drain (pilot oil code 6). 3) R5V10-4*5 up to 280 bar. 4) R5V08 SAE62: Tank port SAE61 (M10) RE_-R_V obe_24-45-A-B 5715-651 UK 29.01.19 Parker Hannifin Corporation...
Series RE*T / R*V RE06M*T Parametrizing connector Central connector Air bleeding Parker R*V / RE*T pressure valves have an integral Block diagram of integral elektronics Code F/10V electronic and requires only one sole electrical common for the control system. Different flow sizes,...
If valves with onboard electronics are used in safety-related parts of control systems, in case the safety function is requested, the valve electronics voltage supply is to be switched off by a suitable switching element with sufficient reliability. Name plate example RE_-R_V obe_24-45-A-B 5715-651 UK 29.01.19 Parker Hannifin Corporation...
< 35 °C The manufacturer is not liable for warranty claims resulting from this. Outdoor storage or within sea and tropical climate will lead to corrosion and might disable the valve! RE_-R_V obe_24-45-A-B 5715-651 UK 29.01.19 Parker Hannifin Corporation...
SAE flanges and on the chemicals exposure, radiation exposure, number of SAE valves. illegal electromagnetic emissions may result in operating trouble and may lead to failure! Follow the operating limits listed in the “spe- cifications“ table! RE_-R_V obe_24-45-A-B 5715-651 UK 29.01.19 Parker Hannifin Corporation...
DIN 51524 & 51502. Special gaskets may be available depending on the utilized fluid. In case of insecurity please consult Parker. Air Bleeding of Hydraulic System During initial startup, after an oil change as well as after the opening of lines or valves the hydraulic system must be air bleeded.
It is necessary to use a low ohmic Skinning lengths for the connecting cable: potential connection between control unit and machine frame to prevent earth loops (cross section AWG 6). Do not disconnect cable socket under tensi- RE_-R_V obe_24-45-A-B 5715-651 UK 29.01.19 Parker Hannifin Corporation...
Each valve requires a separate pre-fuse (ra- ting: s. techn. data). Non-observance of this instruction may create irreparable damage of valve resp. incorporated system parts. Wiring diagram of supply voltage RE_-R_V obe_24-45-A-B 5715-651 UK 29.01.19 Parker Hannifin Corporation...
Page 16
5...10 kOhm. A nominal power rating of 0.1 W is sufficient. Wiring diagram of current command input 0...20 mA code G Wiring diagram of current command input 4...20 mA code R/4MA RE_-R_V obe_24-45-A-B 5715-651 UK 29.01.19 Parker Hannifin Corporation...
Storage of complete parameter sets is possible as well as printout or record as a text file for further documentation. The PC software can be downloaded free of charge at www.parker.com/isde – see page “Support" or directly at www.parker.com/propxd. Hardware requirements ®...
The name is • Start the operating program. “parker” and cannot be changed. Thus additionally to the button “Default” for loading of the default • After displaying the program resp. data base parameters, the button “Send parameter”...
Individual description of expert parameters Adjustment of dither amplitude. dither amplitude To reduce the influence of solenoid friction. Adjustment of dither frequency. dither frequency To match the dither signal to the valve dynamic. RE_-R_V obe_24-45-A-B 5715-651 UK 29.01.19 Parker Hannifin Corporation...
The file name already exists within the indicated directory. Select Do you want to replace the another name, another directory or overwrite the existing file with file? “OK”. RE_-R_V obe_24-45-A-B 5715-651 UK 29.01.19 Parker Hannifin Corporation...
R5V08 S16-91851-0 S16-91851-5 R5V10 S16-91852-0 S16-91852-5 R5V12 S26-27421-0 S16-27421-5 Please combine seal kit of one size with seal kit of pro- portional section P2 for complete seal kit. NBR: S26-58473-0, FPM: S26-58473-5. RE_-R_V obe_24-45-A-B 5715-651 UK 29.01.19 Parker Hannifin Corporation...