You can choose between five volumes
(1–5; e.g. volume 2 = ˆ) and
the "Crescendo" ring (6; volume
increases with each ring =
You can choose between 15 different
You can configure the following functions
with different ringtones:
: For external calls
: For internal calls
All: The same for all functions
Settings for individual functions
Set the volume and melody depending on
the type of signalling required.
Setting, e.g. select
Change multiple line input:
Set volume (1–6).
Scroll to the next line.
Press the display key to save
In idle status, you can also open the menu
by pressing t briefly.
Settings for all functions to ring the
Set volume and ringtone (see "Settings
for individual functions").
Press the display key to con-
firm the prompt.
Press and hold (idle status).
Activating/deactivating the ringtone
Before answering a call or while your
handset is in idle status, it is possible for
you to cancel the ringtone permanently or
for the current call. The ringtone cannot
be re-activated while an external call is in
Deactivating the ringtone permanently
Press the star key and hold
until you can no longer hear
The Ú icon appears in the display.
Re-activating the ringtone
Press and hold the star key.
Deactivating the ringtone for the current
Press the display key.
Activating/deactivating the alert tone
In place of the ringer tone you can activate
an alert tone. When you get a call, you will
hear a short tone ("Beep") instead of the
Press and hold the star key
and within 3 seconds:
Press the display key. A call is
now signalled by one brief
alert tone. You will now see
º in the display.
Your handset uses 'advisory tones' to tell
you about different activities and sta-
tuses. The following advisory tones can be
activated and deactivated independently
of each other:
Key beep: Each key press is acknowl-
– Confirmation tone (rising tone
sequence): at the end of the entry/