Download  Print this page

Setting The Alarm Clock; Restoring The Handset Default Settings - Siemens Gigaset E45 User Manual

Siemens gigaset e45: user guide
Hide thumbs

Advertisement

setting and when an SMS or a new
entry arrives in the answering
machine list (depending on base) or
the calls list
– Error beep (descending tone
sequence): when you make an
incorrect entry
– Menu end tone: when scrolling at
the end of a menu
u
Battery low beep: the battery pack
requires charging.
¢
¢
v
Ð
Audio Settings
Advisory Tones
¤
Change multiple line input:
Key Tones:
Select
or
.
On
Off
Confirm.:
Select
On
or
Off
.
Battery:
Select On,
or
Off
tone is activated/deactivated or only
sounds during a call.
¤
Save changes (page 21).
You cannot deactivate the confirmation
tone for placing the handset in the charg-
ing cradle.

Setting the alarm clock

Requirement: the date and time have
already been set (page 7).
Activating/deactivating the alarm
clock and setting the wake-up time
¢
v
ì
¤
Change multiple line input:
Alarm Clock:
Select
On
or
Off
.
Time:
Enter the wake-up time in 4-digit for-
mat.
Melody:
Select melody.
Volume:
Set the volume (1-6).
¢
Call. The battery
In
¤
Save changes (page 21).
You will see the ¼ icon.
A wake-up call with the selected ringer
melody is signalled on the handset. The
wake up call sounds for 60 seconds. The
display shows
Alarm Clock
pressed the wake-up call is repeated twice
at five minute intervals and then switched
off.
During a call, the wake-up call is signalled
by a short tone.
Deactivating the wake-up call/
repeating after a pause (slumber
mode)
Requirement: A wake-up call is sounding.
Press the display key. The
§Off §
wake-up call is deactivated.
or
Press the display key or any
§Snooze§
key. The wake-up call is deacti-
vated and then repeated after
5 minutes. After the second
repetition the wake-up call is
deactivated completely.
Restoring the handset default
settings
You can reset any individual settings and
changes that you have made. This will not
affect entries in the directory, call-by-call
list or calls list, nor the handset's registra-
tion to the base station.
¢
¢
v
Ð
Handset
Press the display key.
§Yes§
a
Press and hold (idle status).
Cancel the restoring process by pressing
a or the display key
Handset settings
. If no key is
¢
Reset Handset
.
§No§
17

Advertisement

loading

  Also See for Siemens Gigaset E45