Setting Display Illumination; Activating/Deactivating Auto Answer; Adjusting The Loudspeaker Volume - Siemens Gigaset E45 User Manual

The screen picture is not displayed in cer-
tain situations, e.g. during a call or when
the handset has been deregistered.
If a screen picture has been activated, the
menu item
Screen Picture
‰
.
¢ ¢
v Ð
Display
The current setting is displayed.
¤
Change multiple line input:
Activation:
Select (screen picture is displayed)
On
or Off (no screen picture).
Selection:
Change screen picture if necessary (see
below).
¤
Save changes (page 21).
If the screen picture conceals the display,
press the end call key briefly to show the
idle display with time and date.
Changing the screen picture
¢ ¢
v Ð
Display
s
Scroll to the
Press the display key. The
View§
active screen picture is dis-
played
s
Select picture/Clock
press
§OK§
¤
Save changes.

Setting display illumination

Depending on whether or not the handset
is in the charging cradle you can set differ-
ent levels of display illumination. If the
charging cradle is switched on, the display
is permanently dimmed.
¢ ¢
v Ð
Display
is marked with
¢
Screen Picture
¢
Screen Picture
line.
Selection
and
.
¢
Backlight
The current setting is displayed.
¤
Change multiple line input:
In Charger
Select or .
On Off
without Charger
Select or .
On Off
Press the display key.
§Save§
a
Press and hold (idle status).
Activating/deactivating auto
answer
If you have activated this function, when
you get a call you can simply lift the hand-
set out of the charging cradle without hav-
ing to press the talk key c.
¢ ¢
v Ð
Handset
Auto Answer
Select and press
a
Press and hold (idle status).
Adjusting the loudspeaker
volume
You can set the loudspeaker volume for
handsfree speaking to five different levels
and the earpiece volume to three different
levels. You can only make these adjust-
ments during an external call.
The handsfree volume can only be
adjusted when this function is set.
You are conducting an external call.
t
Open menu.
r
Select volume.
Press display key if necessary
§Save§
to save the setting perma-
nently.
If t is assigned a different function:
Open menu.
§Options§
Volume Select and press
Configure setting (see above).
Handset settings
‰
( = on).
§OK§
.
§OK§
15