The battery pack may warm up as it is
charging. This is not dangerous.
After a time the charge capacity of the
battery pack will decrease for technical
Setting the date and time
If you have not yet set the date and time,
press the display key
To change the time, open the input field
Change multiple line input:
Enter day, month and year in 6-digit
Enter hours and minutes with 4 digits,
e.g. Q M 1 5 for 07:15
Press the display key.
Changing the base station
If your handset is registered to more than
one base station, you can set it to a partic-
ular base station or to the base station
that has the best reception
Select one of the registered
base stations or
Making an external call
External calls are calls using the public tel-
Enter the number and press
the talk key.
to open the
Press and hold the talk key
c and then enter the
You can cancel the dialling operation with
the end call key a.
You are shown the duration of the call
while the call is in progress.
– Dialling using the directory, call-by-call list
(page 1, page 10) or last number redial list
(page 12) saves time re-entering numbers
and network provider access codes ("call-
Ending a call
Press the end call key.
Answering a call
The handset indicates an incoming call in
three ways: by ringing, by a display on the
screen and by the flashing handsfree
You can accept the call by:
Pressing the talk key c.
Pressing the handsfree key d.
If the handset is in the charging cradle and
function is activated
(page 15), the handset will take a call
automatically when you lift it out of the
If the ringtone is intrusive, press the dis-
. You can take the call so
long as it is displayed on the screen.
In handsfree mode instead of holding the
handset to your ear you can put it down
e.g. on the table in front of you to allow
others to participate in the call.